Welcome to the Ivy Ann Shears 360° Viewer!
THE INDUSTRY'S FIRST AND ONLY INTERACTIVE SHOPPING EXPERIENCE.
We offer an exclusive shopping experience to view your shears in
High Definition 4K quality, before you invest.
So go ahead, click around, explore.
Experience your new shears as if they were in your hands!
Signature Sword
5.5 Inch, 6 Inch, 6.5 Inch, 7 Inch
1. Click and Drag To Rotate
2. Click to Zoom
Never feel more comfort in your hands. The larger handle on these powerful shears creates the perfect balance for fluid movements. These shears are excellent for scissor-over-comb and bulk removal, as well as point and chip cutting.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Chokuba blades, 1 Sword blade, 1 full Hamaguri convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset 3D Style
Length: 5.5" 6" 6.5" 7"
Signature Dry Cutter
6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
These shears are made specifically for dry cutting. This scissor has one wide blade and one narrow blade, which allows the angle of the opening between the two blades to remain the same from the pivot point to the tip. This cutting angle, unlike other shears, allows the hair to be cut without pushing. This combination of blades makes this scissor perfect for cutting blunt lines but will NOT work well for slice cutting.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 1 Chokuba blade (1000mm - 1200mm Radius), 1 Sasaba K-blade (600R), both Hamaguri full convex.
Handle Steel Type: SUS440 Stainless Steel
Handle Style: Traditional Japanese Eyeglass Butterfly Handle
Length: 6"
Signature Slide Cutter
6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
The perfect slice cutter! The wide blade angle of around 55 degrees prevents the cuticle from getting caught when dry cutting and allows the hair to escape for a more diffused look, or as we like to call it, frothy 😉. The extra-wide bamboo leaf style blade makes this the best slice cutter on the market today. Try it and you will never use another scissor for slice cutting again! This scissor is NOT suitable for blunt cuts.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: Bamboo Leaf Style, both Hamaguri full convex.
Handle Steel Type: SUS440 Stainless Steel
Handle Style: Traditional Japanese Eyeglass Butterfly Handle
Length: 6"
Signature Texturizer
6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
The perfect shears for slice-cut texturizing! These texturizing shears are a must-have for any professional stylist. The Signature Texturizer removes approximately 60% of the hair when cutting at a 90° angle to the hair, such as in the scissor-over-comb cutting technique. When used for dry-cut texturizing, the Signature Texturizer can remove 10–60% of the hair, depending on the angle of the cut. Contrary to common belief, this texturizer is NOT reversible and, if used in such a manner, will damage the client's hair. When the desired result is a beautifully finished bob cut, cut facing in and without damage to the client's hair, a counter-blade texturizer is recommended.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: Cutting blade is Sasaba K-blade (600R). Chokuba comb blade has 10 Teeth with 10 grooves per tooth. (1000mm - 1200mm Radius) Both blades are full Hamaguri convex.
Handle Steel Type: SUS440 Stainless Steel.
Handle Style: Traditional Japanese Eyeglass Butterfly Handle
Length: 6"
Low-grade thinners and texturizers are normally cut by wire at a 90° angle. This method allows for the mass production of 200+ blades at one time. This mass-production style blade is actually damaging to the hair.
Our patented thinning shears are cut at a 70-degree angle, which allows only ONE blade to be cut at a time.
This production method allows for slice-cut thinning, a cutting technique unique to Ivy Ann Professional Shears. This cutting blade style allows the hair to escape the thinning teeth without snagging and damaging the hair.
This is why our thinners and texturizers continually outperform major competitors' thinners.
Signature 10 Layer Damascus
5.5 Inch, 6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
Excellent shears for point and chip cutting and scissor over comb. The shape of the blade surface is almost straight and is suitable for thin European hair with an oval cross section, but it is not strong enough for thick coarse hair with a round cross section.
3. Click and drag while zoomed to move.
Blade Steel Type: 10 Layer Cold Forged Stainless Damascus base & ATS-314 core.
Blade Style: 2 Chokuba blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset 3D Style
Length: 5.5" & 6"
The Perfect Cutter
5.5 Inch, 6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
This cutter is one half of what we like to call The Perfect Pair™, two shears any stylist can feel comfortable using that will also last a lifetime. These are excellent shears for just about everything, from scissor-over-comb and point-cutting work to perimeter work and even slide cutting; they will handle just about anything you throw at them, but please don't throw them.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Chokuba blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset 3D Style
Length: 5.5" & 6"
The Perfect Texturizer
6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
The perfect shears for slice-cut thinning! These thinning shears are a must-have for any professional stylist. This thinner removes approximately 30–35% of the hair when cut at a 90° angle to the hair, as in the scissor-over-comb cutting technique. When used for dry-cut thinning, it can remove 10–35% of the hair, depending on the angle of the cut.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: Cutting blade is Sasaba K-blade (600R). Chokuba comb blade has 30 Teeth with 3 grooves per tooth. (1000mm - 1200mm Radius) Both blades are full Hamaguri convex.
Handle Steel Type: SUS430 Stainless Steel.
Handle Style: Offset 3D Style
Length: 6"
Low-grade thinners and texturizers are normally cut by wire at a 90° angle. This method allows for the mass production of 200+ blades at one time. This mass-production style blade is actually damaging to the hair.
Our patented thinning shears are cut at a 70-degree angle, which allows only ONE blade to be cut at a time.
This production method allows for slice-cut thinning, a cutting technique unique to Ivy Ann Professional Shears. This cutting blade style allows the hair to escape the thinning teeth without snagging and damaging the hair.
This is why our thinners and texturizers continually outperform major competitors' thinners.
Sassoon Sword
6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
While these shears are excellent for various cutting techniques, the sword blade is a type of blade in which the central part of the blade is mountain-shaped and one center line runs from the pivot point to the tip. This center line pushes power away from the pivot screw and directs it towards the tips of the shears, thus creating an excellent shear for point and chip cutting.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Chokuba blades (1000mm - 1200mm Radius), 1 sword blade and 1 full Hamaguri convex.
Handle Steel Type: SUS440 Stainless Steel
Handle Style: Traditional Japanese Eyeglass Butterfly Handle
Length: 6"
Ivy Ann Slide Cutter
5.5 Inch, 6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
Why do you need a slice cutter? You don't.... Let Karen take up chair time; who doesn't want to spend additional time fixing those chunky lines from her daughters, "at home trim"? Live life on the edge; I won't judge you. But if you want to diffuse those chunky lines fast and have her looking as frothy as the Starbucks she spilled during her last appointment, you need a slice cutter. Keep Karen moving with a shear specifically designed to avoid snagging on blown-out cuticles. The wide, 55° angle of these shears, will create a great diffused look in no time, all without damaging the structure of the hair....for your clients who do actually care about their hair.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Bamboo leaf style blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset Style
Sizes: 5.5" & 6"
Ivy Ann Detailer
5.5 Inch, 6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
The long, slender blade and the thin handle on these shears give our detailer a light feel in your hands, making delicate work a breeze. Another one of those: do I need a detail shear?—well, no, not really. At the end of a long day, I know one thing, though: I'm not reaching for The Tony™ when Becky Bangs walks in at 7:45pm. What I am grabbing is the lightest pair of shears I can find that I know my tired hands won't struggle with. When you work hard, you deserve to buy back your time and your comfort, so, do you need it? Or is the question, do you want it bad enough?
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Yanagiba blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset Style
Sizes: 5.5" & 6"
Ivy Ann Crane
6 Inch, 6.5 Inch, 7 Inch
1. Click and Drag To Rotate
2. Click to Zoom
Feeling some shoulder pain? Looking to bring that elbow back down to earth? A traditional Japanese crane handle could be exactly what you need. The exaggerated offset of these shears allows a stylist to hold their hands and arms in a more comfortable position, eliminating shoulder and elbow pain. These are excellent shears for all around cutting, including point and chip cutting and scissors over comb.
3. Click and drag while zoomed to move.
Blade Steel Type : Cold Forged ATS-314
Blade Style: 2 Yanagiba blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset Crane Style
Sizes: 5.7" & 6.2" & 6.7"
Offset Slide
5.5 Inch, 6 Inch
1. Click and Drag To Rotate
2. Click to Zoom
Excellent shears for all-around everyday cutting. From perimeter work to blending layers by slice cutting or even more delicate work, these shears check off every box. This shear is truly a jack of all trades for any stylist.
3. Click and drag while zoomed to move.
Blade Steel Type: Cold Forged ATS-314
Blade Style: 2 Chokuba blades, both Hamaguri full convex.
Handle Steel Type: SUS430 Stainless Steel
Handle Style: Offset Style
Length: 5.5" & 6.0" & 6.5"